microHAM micro2R u2R User Manual page 61

micro2R + micro KEYER II + Station Master
Special notes:
The CW and microphone outputs from microKEYER II to Radio 1 should be disconnected. The
●
microphone, PTT and CW outputs from u2R should be used instead.
The station microphone or headset should be connected to u2R.
●
The WinKey in MKII is not used. The logging program must use the WinKey port of u2R.
●
Use microHAM CODEC as the sound card with u2R.
●
Use FSK port on MKII for Radio1 instead of Radio 1 FSK port of u2R.
●
Constant level audio output from Radio 2 can be connected to the SUBRX input of MKII instead of
●
nd
2 RX of Radio 1. This way logger gets Radio1 audio in left channel and Radio 2 audio in right
channel of microHAM codec.
PTTIN of MKII can be connected in parallel with Radio 1 PTTIN of u2R.
●
rd
3 party band decoders used for automatic Antenna and BPF switching must use the Yaesu TTL
●
band data format.
microHAM © 2010 All rights reserved
61