microHAM micro2R u2R User Manual page 62

micro2R + 2 x micro KEYER II + 2 x Station Master
Special notes:
The CW and microphone outputs from both microKEYER II should be disconnected. The
●
microphone, PTT and CW outputs from u2R should be used instead.
The station microphone or headset should be connected to u2R.
●
The MK II WinKey are not used. The logging program must use the WinKey port of u2R.
●
Use microHAM CODEC from the first MK II as the sound card with u2R.
●
Use FSK port on MKII for Radio1 instead of the Radio 1 FSK port of u2R.
●
Use FSK port on MKII for Radio2 instead of the Radio 2 FSK port of u2R.
●
PTTIN of each MKII can be connected in parallel with the appropriate PTTIN of u2R.
●
For digital modes use microHAM Codec 1 of MKII 1 for Radio 1 and microHAM Codec 2 of MKII 2
●
for Radio 2.
microHAM © 2010 All rights reserved
62