Dvk Tab - microHAM micro2R u2R User Manual

allows each bank to be configured for the voice of a different operator if micro2R is used in a multi-operator
station.
Under Windows 2000 or XP, Router DVK
uses the sound card defined on the Audio
Mixer Tab. Under Vista, the input and output
sound cards are defined on the DVK tab.
NOTE: In Vista and Windows 7 you must
select the microphone and speaker
output of your sound card.
REC MIC: adjusts microphone level during
message recording (record level).
TX R1/R2 LEFT and RIGHT operate the
same way as the TX VOICE controls
described in the Audio Mixer tab.
If "On Air Recording" box is checked, the
microphone audio is automatically forwarded
to the transceiver with Transmit Focus
(selected transceiver) while message is
recorded.
microHAM © 2010 All rights reserved

DVK TAB

micro2R allows recording and playing nine voice
messages per bank and an unlimited number of banks
(limited only by the capacity of the computer hard disk).
Banks can be managed with Rename, Add and
Remove buttons. Rename to rename the current bank,
Add to create a new bank, and Remove to delete the
current bank. Bank selection is provided by Bank box.
Each memory may repeat with a programmable delay
(loop) or can be chained with another memory using
external keyboard or keypad.
While a DVK message is recorded or played micro2R
uses the DVK mixer settings. When recording or
playback is done, the settings in the Audio Mixer are
restored. DVK mixer settings are not stored with
presets but in the message banks. This means each
bank can have its own levels (slider position). It also
37