microHAM micro2R u2R User Manual page 63

micro2R + 2 x USB Interface III
Special notes:
The CW outputs from the USB Interfaces should be disconnected.
●
Use the micro2R CW/WinKey ports for CW.
●
A computer sound card must be used for for SSB DVK.
●
For digital modes use USB Audio Codec 1 of USBIII 1 for Radio 1 and USB Audio Codec 2 of
●
USBIII 2 for Radio 2.
rd
3 party band decoders used for automatic Antenna and BPF switching must use the Yaesu TTL
●
band data format.
microHAM © 2010 All rights reserved
63