micro2R + micro KEYER
Special notes:
The CW and microphone outputs from microKEYER should be disconnected. The microphone,
●
PTT and CW outputs from u2R should be used instead.
The station microphone or headset should be connected to u2R.
●
The microKEYER WinKey is not used. The logging program must use the WinKey port of u2R.
●
Use FSK port on MK for Radio1 instead of Radio 1 FSK port of u2R.
●
For digital mode operation, the constant level audio output from each radio should be isolated using
●
audio transformers. The sound card In line from microKEYER should be connected to the left audio
channel (tip and sleeve) of the sound card line input. The right radio (Radio 2) should be connected
to the right audio channel (ring and sleeve) of the stereo sound card Line input using an external
transformer.
rd
3
party band decoders used for automatic Antenna and BPF switching must use the Yaesu TTL
●
band data format.
microHAM © 2010 All rights reserved
64