Functions Tab - microHAM MK2R Manual

The Functions Tab provides a tool for managing the operating modes and defining the audio configuration
in each of the eight states. Configuration data can be uploaded to MK2R and saved as a function or it can
be saved to an file on the computer. Any single function or all eight functions can be retrieved from MK2R,
saved on the computer and modified. New or modified configurations can be saved, uploaded to MK2R
and/or shared with other users.
The Function (select) box is used to select the function to be retrieved, loaded or edited.
Description provides a short title to remembering the purpose of the configuration when storing the
configuration to a file. The description is not saved in MK2R.
Each check box indicates that the associated LED/control is on.
MK2R supports the following HEADPHONE states:
RX focus on R1:
RX focus on R2:
Computer TX on R1: RADIO1 in transmit by computer (serial PTT, WinKey, or Protocol).
Computer TX on R2: RADIO2 in transmit by computer (serial PTT, WinKey, or Protocol).
Manual TX on R1:
Manual TX on R2:
STEREO:
FIXED:
Unused states are grayed out.
FIXED is disabled when Auto headphone switching is selected.
Computer TX is disabled if Latch is not selected
Manual TX is disabled if Monitor is not selected.
microHAM © 2010 All rights reserved

FUNCTIONS TAB

Both radios receiving, RADIO1 has RX Focus
Both radios receiving, RADIO2 has RX Focus
RADIO1 in transmit manually (Footswitch, mic PTT, paddles, or VOX).
RADIO2 in transmit manually (Footswitch, mic PTT, paddles, or VOX).
Priority "stereo" state. Special "Stereo" settings are applied when the
logging program selects "stereo" or split operation.
Automatic headphone switching is disabled
63