microHAM MK2R Manual page 64

These RECORDING/DIGITAL states are available:
RX focus on R1:
RX focus on R2:
NOTE: Split/Stereo is ignored for Recording/Digital
Functions stored in MK2R can be saved to and restored from a file.
configurations by exchanging files.
The control buttons are:
Get:
Get All:
Store:
Store All:
Load From File:
Load All From File: loads definitions for F1 through F8 into Router from a file
Save to File:
Save All to File:
The default location for u1s and usc files is:
C:\Documents and Settings\All Users\Application Data\microHAM\cfg
TIP: The Function Tab is an EDITOR, not an on-line configuration tool. All changes must be
written to MK2R with STORE or STORE ALL before they can be used.
Once the configuration has been written to MK2R, it can be selected by pressing the
appropriate F-key on the MK2R front panel or by selecting the desired function and pressing
APPLY on the Function tab.
microHAM © 2010 All rights reserved
RADIO1 is selected (has RX Focus)
RADIO2 is selected (has RX Focus)
retrieve the selected Function from MK2R.
retrieve all stored Functions from MK2R.
store the currently selected Function to MK2R.
store all Functions defined in Router to MK2R.
loads a single Function into Router from a file
Single function files have a u1s extension
"All function" files have a usc extension
store the current Function to a u1s file.
store all Function definitions to a usc file.
64
Users can share