Functions Tab - microHAM micro KEYER 2R Manual

The Functions Tab provides a tool for managing the operating modes. Audio switching for each of MK2R's
six "states" can be defined graphically and each of the eight "Function" memories can be written to the
MK2R.
Each check box on the Function Tab indicates that the associated LED/control is on.
Note: the Transmit State (TX on R1, TX on R2) will override the RX focus state.
Note: the Transmit State is ignored if "Latch" is checked.
Note: the Stereo state overrides all states when selected by the application (logger)
Functions stored in MK2R can be saved to a file and files can be uploaded to MK2R. Users can
exchange configurations by exchanging files.
The control buttons are:
Get:
Get All:
Store:
Store All:
Load From File:
Load All From File: retrieves definitions for all Functions from a file
Save to File:
Save All to File:
The default location for *.u1s and *.usc files is C:\Program Files\microHAM\cfg
microHAM © 2006 All rights reserved

FUNCTIONS TAB

retrieve the selected Function from MK2R.
retrieve all stored Functions from MK2R.
store the currently selected Function to MK2R.
store all Functions defined in Router to MK2R.
retrieves a single Function from a file
Single function files have a *.u1s extension
All function files have a *,usc extension
store the current Function to a *.u1s file.
store all Function definitions to a *.usc file.
59