Features And Functions - microHAM MK2R Manual

General:
single USB connection (advanced mode) with LPT port for compatibility with "classic standard"
•
stand alone operation without computer
•
support for independent settings for dissimilar radios
•
optimized operation on each radio and dissimilar modes (R1=SSB, R2=CW)
•
innovative dual sound card processing
•
integrated dual USB sound core (MK2R+ only)
•
16 buttons/42 lights for ergonomic function control and status display
•
compatible with most standard MS Windows based logging or control programs
•
DOS mode compatibility with LPT port interface of DOS based contest loggers (CT, TR, NA)
•
Radio control:
integrated level converter for both radios CI-V, FIF-232, IF-232, or RS-232
•
up to 57600 Baud with handshake support
•
fully supports most Icom, Kenwood, TenTec, Yaesu and other radios
•
optical isolation of radio control port from computer
•
Keying:
optical isolation of all keying signals from computer
•
intelligent keying lockouts for both radios (Band lock, Busy lock, External lock)
•
hardware support for "last one wins" or "first one wins" operation
•
easy switching between manual and automatic control
•
independent settings for dissimilar Power Amplifiers
•
Hot Switch PA protection with user defined timing
•
programmable PTT assertion delay in 1ms steps
•
T/R sequencer with extended capabilities
•
separately sequenced keying outputs for low noise amplifier or receive antenna control
•
supports dual (one per radio) or single foot switch operation
•
supports separate PTT for each radio with automatic TX focus control
•
supports VOX and CAT T/R switching
•
wide range solid state outputs for modern PA keying or QSK PA separately for each radio
•
relay isolated outputs for negative or high voltage PA control for each PA
•
CW:
integrated second generation K1EL WinKey2™
•
front panel speed knob
•
selectable side tone capabilities with "paddle side tone" function
•
nine (9) user programmable memories
•
application independent contest auto-numbering
•
supports PS/2 keyboard for CW transmission with type ahead
•
supports PS/2 keyboard or keypad for CW "memory keyer" and control
•
PS/2 keyboard or keypad CW works without computer connection
•
handles multiple CW sources: WinKey2, serial port and/or LPT port with steering
•
microHAM © 2010 All rights reserved

1 - FEATURES AND FUNCTIONS

4