Configuring The Usb Audio Codec And Usb Voice Codec - microHAM MK2R Manual

microHAM © 2010 All rights reserved
Configuring USB Audio CODEC and USB Voice CODEC (MK2R+ only)
Windows will automatically install the USB Audio Device
driver to support the USB Audio CODEC and USB Voice
CODEC in MK2R+
Windows automatically selects any newly installed audio
device as the default device for Sound Playback and
Sound recording. This is undesirable as Windows Sounds
would be played through MK2R+ and onto the air!
For Windows 2000 or Windows XP. right click on the
Speaker Icon on the task bar and select "Adjust Audio
Properties" or open "Sounds and Audio Devices" in Control
Panel and reset the Default device for Sound Playback and
Sound Recording to your computer's primary sound
device.
17