microHAM MK2R Manual page 10

(11) – TX1: Adjusts drive level from the sound card to RADIO1
(12) – PTT1/PTT2:
RED color indicates PTT1 (RADIO1 front panel microphone jack PTT) is active
GREEN color indicates PTT2 (rear panel of RADIO1) is active
YELLOW color indicates both PTT1 + PTT2 are active
(13) – CW/FSK:
RED color indicates the CW output to RADIO2 is active
GREEN color indicates the FSK output to RADIO2 is active
(14) – TX2: Adjusts drive level from the sound card to RADIO2
(15) – PTT1/PTT2:
RED color indicates when PTT1 (RADIO2 front panel microphone jack PTT) is active
GREEN color indicates when PTT2 (rear panel of RADIO2) is active
YELLOW color indicates when both PTT1 + PTT2 are active
(16) – RECORDING/DIGITAL LEFT: Controls the left channel audio level to SC2 Line In (MK2R) or USB
Audio CODEC (MK2R+) for audio recording or digital mode operation.
(17) – RECORDING/DIGITAL RIGHT: Controls the right channel audio level to SC2 Line In (MK2R) or
USB Audio CODEC (MK2R+) for audio recording or digital mode operation.
microHAM © 2010 All rights reserved
10