Menu: Virtual Port; Menu: Help - microHAM MK2R Manual

NOTE: Properly working ports should not display an exclamation mark (!).
Manuals: Link to microHAM manuals located on your system
Setup Guides: Link to software configuration guides for many common applications.
Cable Schematics: Link to cable diagrams.
Download Documents: Downloads microHAM documentation including updated manuals and setup
guides. You may specify the products for which you want documentation. This requires an Internet
connection.
microHAM Home Page: Link to
microHAM Downloads Page: Link to
Show Tooltips: When checked, small, single line help is displayed below the mouse cursor
Update Router: Download and install the most recent version of Router.
About: Shows the Router's internal version number
Change logs: Shows the Router and firmware changes.
microHAM © 2010 All rights reserved
VIRTUAL PORT MENU
HELP MENU
www.microHAM.com
www.microham.com/contents/en-us/d29.html
25
It is necessary to create a number of virtual serial
ports (COM ports) in order for a Windows
application (logging, control or digital mode
program) to access microHAM devices.
Create - Creates virtual COM ports. It is possible to
select more ports at once by holding the Control
key on the keyboard and clicking on COM port
numbers. Creating a virtual port may take a while,
be patient.
Delete - Deletes any single virtual port.
Delete All - Deletes all previously created virtual
ports and resets Virtual Serial Port bus.
Do not delete a virtual port unless all applications
using that port have been closed.