Changing The Programme After It Has Started; Childproof Lock; Finishing By Canceling The Programme - Blomberg TKF 8439 User Manual

"Ventilation":
- Illuminates when the programme ends.
C Anti-creasing icon will light up at the
end of the programme if anti-creasing
function is active.
Changing the programme after it
has started
You can use this feature to dry your
laundry in a different programme after your
machine has started to run.
For example;
Press and hold the "Start/Pause/Cancel"
button for about 3 seconds to "Cancel"
the programme in order to select "Extra
Dry" programme instead of "Iron Dry"
programme.
Select the "Extra Dry" programme by
rotating the programme selection knob.
Press "Start/Pause/Cancel" button to start
the programme.
C The programme which is selected first
will continue even if the programme
selection button is turned to another
programme position while the machine
is operating. You must cancel the
ongoing programme in order to change
the drying programme. (See. Finishing
by canceling the programme)
Speed and function indicators will turn
off when you change the position of the
programme selection knob while the
machine is running (audio warning, drying
level and anti-crease symbols). However,
the current programme continues. If the
programme selection knob is turned back
to the current programme, symbols of
those indicators will appear again.
Adding/removing laundry in standby mode
In order to add or remove laundry after the
programme starts:
1. Press the "Start/Pause/Cancel" button
to switch the dryer to "Pause" mode.
Drying process will stop.
2. Open the door at "Pause" position and
close it again after adding or taking out
laundry.
3. Press "Start/Pause/Cancel" button to
start the programme.
C Any laundry added after the drying
process has started may cause the
dried clothes in the machine intermingle
with wet clothes and the result will be
wet laundry after the drying process is
over.
C Laundry may be added or taken out
as much as desired during a drying
process, but this process will extend
the programme duration and increase
energy consumption since the drying
will be interrupted continuously.
Therefore, it is recommended to add
laundry before the drying programme
has started.
Child-proof lock
There is a child-proof lock to prevent
any programme interruption due to the
pressing of button while the programme is
running. The loading door and all buttons
except the "On/Off" button on the control
panel are deactivated when the child-proof
lock is active.
In order to activate the childproof lock,
press on the "audio warning" and "anti-
creasing" buttons simultaneously for 3
seconds.
To start a new programme after the
programme is over or to interrupt the
programme, the child-proof lock should be
deactivated. Press the same buttons for
3 sec. again to deactivate the child-proof
lock.
C Lock symbol will appear on the screen
when the child-proof lock is activated.
Finishing by canceling the
programme
The programme which is selected first will
keep on running even if the position of the
programme selection knob is changed
when the dryer is operating. A new
programme can be selected and started
after "Programme cancel" is activated in
order to change the drying programme.
To cancel any selected programme:
17
EN