Electrical Connection; Adjusting The Feet; First Use; Disposing Of Packaging Material - Blomberg TKF 8439 User Manual

Hide thumbs Also See for TKF 8439:
Table of Contents

Advertisement

Available languages

Available languages

with the machine to the pipe fitting.
3. The other end of the drain hose can be
directly connected to the wastewater
drain or to the washbasin. The fitting
must always be secured in all types of
connections. Your house may be flooded
if the hose gets out of its housing during
water discharge.
Important:
• The hose should be attached to a height
of maximum 80 cm.
• You must be careful not the pinch or
bend the hose.
• The end of the hose should not be bent,
it should not be stepped on and it must
not be folded between the drain and the
machine.

Adjusting the feet

In order to ensure that your machine
operates more silently and vibration-free, it
must stand level and balanced on its feet.
Balance the machine by adjusting the feet.
Rotate the feet to adjust until the machine
stands level and firmly.
C Never unscrew the adjustable feet from
their housings.

Electrical connection

Connect the machine to a grounded outlet
protected by a fuse of suitable capacity as
stated in the technical specifications table.
Our company shall not be liable for any
damages that will arise when the machine
is used on a circuit without grounding.
• Connection must comply with national
regulations.
• If the current value of the fuse or breaker
in the house is less than 16 Amps, have
a qualified electrician install a 16 Amp
fuse.
• Power cable plug must be within easy
reach after installation.
• The voltage and allowed fuse or breaker
protection are specified in the "Technical
Specifications" section.
• The specified voltage must be equal to
your mains voltage.
• Do not make connections via extension
cables or multi-plugs.
• The main fuse and switches must have
a contact distance of minimum 3 mm.
B Damaged power cable must only be
replaced by a qualified electrician.
B If the product is faulty, it must not be
operated unless it is repaired! There is
the risk of electric shock!

First use

• To have the product ready for operation
before calling the authorised service
agent, make sure that its location
and power supply installations are
appropriate. If they are not, call a
qualified electrician to have any
necessary arrangements carried out.
• Make sure that the power connections
of the product are in accordance
with the instructions given in relevant
chapters of this manual.
Disposing of packaging mate-
rial
Packaging materials are dangerous to
children. Keep packaging materials in
a safe place out of reach of children.
Packaging materials of your product are
manufactured from recyclable materials.
Sort and dispose of them in accordance
with recycled waste instructions. Do not
dispose of them with normal domestic
waste.

Transportation of the machine

1. Unplug the machine from the mains.
2. Remove the water drain (if any) and
chimney connections.
3. Drain water remained in the machine
completely before transportation.

Disposing of the old machine

Dispose of your old machine in an
environmentally friendly manner.
Refer to your local dealer or solid waste
collection centre in your area to learn how
to dispose of your machine.
Before disposing of your old machine,
cut off the power cable plug and make
the loading door lock unusable to avoid
dangerous conditions to children.
6
EN

Advertisement

Table of Contents
loading

This manual is also suitable for:

Tkf 8439 aTkf 8439 s

Table of Contents