MDS 05-4846A01, Rev. C
3. To set/change the multihost delay time, select Multihost Delay from
the menu. A flashing cursor appears in the field to the right of the
item.
4. Enter the desired delay time (in ms) and press
entry.
Figure 43. Multihost Settings Menu
Configuring Packet Settings
For radios operating in Packet Mode, there are a number of settable
parameters available on the Packet Settings Menu (Figure 44). This
menu is accessible from the following navigation path:
Menu>>Device Configuration>>Packet Settings
Figure 44. Packet Settings Menu
The settable parameters on this menu are:
,
Gap
COM2 Inter-Packet Gap
required, follow the steps below for each of these parameters.
SD Series Ref. Manual (Packet & Transparent Mode)
Invisible place holder
.
Packet Mode
, and
Transparent RX Timeout
to apply the
ENTER
Main
,
COM1 Inter-Packet
. If changes are
55