Task-Oriented Menu Chart - GE MDS SD Series Reference Manual

32 SD Series Ref. Manual (Packet & Transparent Mode)

6.5 Task-Oriented Menu Chart

Table 11 is a task-oriented listing of user and maintenance tasks. To use
the table, find the task you wish to perform, and then refer to the far
right-hand column for the specific menu(s) to use. Additional coverage
of menu tasks is provided in "Using the Menu System—Common
Tasks" on Page 36 which immediately follows this table.
Table 11. Menu Selection Chart
Task
If you wish to...
Category
View top-level unit information (Owner
Name/Message, Unit Number, IP Address,
Serial No., Firmware version, Run time, Alarm
presence, etc.)
View Radio Performance data (Power Output,
Signal-to-Noise Ratio, Received Signal
Strength, DC Input voltage, operating
temperature)
View Serial No., Model 1 (hardware), Model 2
(software) version, Firmware Version, Build
Date
View Bootloader version information, Active
Firmware Image, Firmware Version level
View Alarm/Event information, I/O Statistics,
Ethernet Statistics
Refer to this
Menu>>Submenu(s)
Starting Information
Screen
(See Figure 26 on Page 37)
Radio Performance
(See Figure 27 on Page 37)
Device Configuration>>
Device Info
(See Figure 28 on Page 38)
Maintenance/Tools>>
Version
(See Figure 29 on Page 38)
Statistics/Events>>
Alarms/Events
Event Log
I/O Statistics
Ethernet Statistics
(See Figure 30 on Page 39
& following submenus)
MDS 05-4846A01, Rev. C