GE MDS SD Series Reference Manual page 110

102 SD Series Ref. Manual (Packet & Transparent Mode)
Figure 83. Local Reprogram Menu
7. On the Local Reprogram Menu, verify that the radio has the right IP
address for the TFTP server on the
the reprogramming file is located in the TFTP server on the
option.
8. Start reprogramming by selecting
menu. A progress string indicates the reprogramming status. At this
point, the radio is programming the inactive image. (There is an
Active and an Inactive image in the radio at all times).
9. As soon as reprogramming is complete, verify the package down-
loaded into flash using
inactive image when the choice is presented.
10. Reboot to the inactive image once verification is completed suc-
cessfully, using
Reboot Device
11. Verify that radio is running new application image by logging in
and viewing the firmware version on the
NOTE: If a firmware installation fails, the radio is left with the original
active image intact. The installation should be attempted
again.
Invisible place holder
option. Set the path where
HostIP
Retrieve File
option. Make sure to select the
Image Verify
.
Starting Information Screen
MDS 05-4846A01, Rev. C
File
option from the
.