GE MDS SD Series Reference Manual page 140

REPROG_SER_LOC
REPROLOCAL
REPROREM
132 SD Series Ref. Manual (Packet & Transparent Mode)
—Analog
MPT1411
—x710B compatible
9600B
—x710B compatible
4800B
—x710B compatible
BELL
—1200 bps/12.5 kHz
V23
—19200 bps/12.5 kHz
19200N
—19200 bps/12.5 kHz
19200E
—9600 bps/6.25 kHz
9600N
Serial Reprogramming (Local radio). Optional arguments as follows:
—Initiate serial reprogramming
START
—Verify image in flash
VERIFY
—Copy the active image to the inactive
COPY
—Reboot the device
REBOOT
Reprogramming (of Local radio) via TFTP. Optional arguments as fol-
lows:
—Initiate TFTP reprogramming
START
—Verify image in flash
VERIFY
—Copy the active image to the inactive
COPY
—Reboot the device
REBOOT
—TFTP server IP address
HOSTIP=<IP address>
—Firmware file path
FILE<string>
TIMEOUT=<unsigned 8 bits>
Remote Firmware Upgrade. Optional arguments as follows:
—Initiate remote firmware upgrade
START
—Stop remote firmware upgrade
STOP
—Remote node reboot by version
REBOOT
—Over the air channel usage
MODE=<choices>
—Intrusive (payload data interrupted during upgrade)
Intrusive
—Passive (payload data not interrupted during upgrade)
Passive
PACKET<ranged unsigned 8 bits>
—Minimum size value
40
—Maximum size value
120
RETRY=<ranged unsigned 16 bits>
—Minimum size value
100
—Maximum size value
1024
AUTOREBOOT<choices>
—Auto reboot enabled
Enabled
—Auto reboot disabled
Disabled
—Multi-tier network size
MULTIHOP<choices>
—TFTP timeout
—Data packet size in bytes
—Block retry counter
—Auto Reboot after firmware update
MDS 05-4846A01, Rev. C