Advertisement
Installation Instructions
[] POWER CORD ADAPTER
There are two power cord adapters
included
with the
kit; be sure to use the one specified in the Parts List
on page 7. Plug the female end of the power cord
adapter
(20) onto the male terminals
on the icemaker
power cord. When connecting
the adapter
to the
power cord, make sure the seal is in place between
the connectors.
Secure the power cord adapter
to
the icemaker
by putting it into the hook at the back
of the icemaker
and attaching
it to the icemaker
with
a wire lie (22).
[] INSTALL THE ICEMAKER FILL CUP
Install the icemaker
fill cup (side-mounted)(18)
into
the icemaker as shown.
[] PLUG IN THE ICEMAKER
Holding
the icemaker
in place, insert the icemaker
power cord plug into the socket on the rear wall,
making sure the prongs and holes are matched.
Press the plug firmly into the socket. Lock the plug
in place by clipping the restraints
onto each side of
the plug. Make sure the restraints click into place.
[] MOUNT THE ICEMAKER
• Lift the icemaker
so the f'ill robe(16)
fits in the
Fill cup opening
(E). Hang
the icemaker
on the
two mounting
screws (C).
Make sure:
• The power cord is still firmly in the socket.
• The fill tube (16) extends
into the fill cup
opening
on the back of the icemaker.
(Check
the rear of the refrigerator
to make
sure the
fill tube has not been pushed
out of the back
of the refrigerator).
THEN SECURELY
TIGHTEN
THE ICEMAKER
MOUNTING
SCREWS.
[] INSTALL THE ICE BUCKET
Put the ice bucket (11) under
the icemaker.
Make sure the icemaker
power switch is set to O (off).
_]ATrACH
WARRANTY LABEL
]
A label (9) is provided
with this kit to record
the date
of installation
for warranty
purposes.
Apply it to the
back of the refrigerator.
[]
KEEP THIS MANUAL
The warranty for the icemaker is printed in this
manual.
Keep this manual with your Refrigerator
Owner's Manual.
The icemaker
installation
inside the freezer is now
complete.
Continue
to the Water Valve Assembly
section.
51
Advertisement
