Advertisement
Installation Instructions
[] POWER CORD ADAPTER
There are two power cord adapters
included
with the
kit; be sure to use the one specified in the Parts List
on page 7. Plug the female end of the power cord
adapter (20) onto the male terminals on the icemaker
power cord. When connecting
the adapter to the
power cord, make sure the seal is in place between
the connectors.
Secure the power cord adapter to
the icemaker by putting it into the hook at the back
of the icemaker and attaching it to the icemaker
with awire fie (22).
[] INSTALL THE ICEMAKER FILL
CUP
Install the icemaker fill cup (side-mounted)
(18) into
the icemaker as shown.
[] PLUG IN THE ICEMAKER
Holding
the icemaker
in place, insert the icemaker
power cord plug (D) into the socket on the rear wall,
making sure the prongs and holes are matched.
Press the plug firmly into the socket. Lock the plug
in place by clipping
the restraints
onto each side of
the plug. Make sure die restraints
click into place.
*o
*o
o
[] MOUNT THE ICEMAKER
• Lift the icemaker
so the Fill tube (16) goes into the
fill cup opening (18). Hang the icemaker
on the
two screws (14).
Make sure:
• The power cord is still firmly in the socket.
• The Fill tube (16) extends
into the fill clip
opening
at the back of the icemaker.
(Check
the rear of the refrigerator
to make sure the fill
tube has not been pushed
out of the back of
the refrigerator).
THEN SECURELY TIGHTEN
THE ICEMAKER
MOUNTING
SCREW.
[] INSTALL
THE ICE BUCKET
Place the ice bucket (11) under
the icemaker.
Make sure the icemaker
power switch is set to O (off).
@
[] ATTACH WARRANTY
LABEL
A label (9) is provided with this kit to record
the
date of installation
for warranty
purposes.
Apply it
to the back of the refrigerator.
[]
KEEP THIS MANUAL
The warranty for the icemaker is printed
in this
ma_nual. Keep this manual with your Refrigerator
Owner's Manual.
The
icemaker
installation
inside
the freezer
is now
complete.
Condnue
to the Water
Valve Assembly
section.
43
Advertisement
