Advertisement
Installation Instructions
[] INSTALL THE ICEMAKER FILL CUP
Install the icemaker
f'dl cup (side-mounted)
(18) into
the icemaker as shown.
[] PLUG IN THE ICEMAKER
Place the icemaker
in the freezer
compartment
on its
side as shown. Insert the icemaker
power cord plug
(D) into the socket on the side wall, making sure the
prongs and holes are matched.
Press the plug firmly
into the socket,
b
[] INSTALL THE ICE BUCKET
Put the ice bucket (11 ) directly under
the icemaker
(to the left and all the way to the rear of the shelf
under
the icemaker).
Make sure the icemaker
power switch is set t_ O (off).
[_ ATTACH WARRANTY LABEL
A label (9) is provided
with this kit to record
the date
of installation
for warranty
purposes.
Apply it to the
back of the refrigerator.
[]
KEEP THIS MANUAL
The warranty for the icemaker
is printed in this
manual. Keep this manual with your Refrigerator
Owner's Manual.
The icemaker
installation
inside the freezer is now
complete.
Continue
to the Water Valve Assembly
section.
[] MOUNT THE ICEMAKER
• Lift the icemaker
so the f'dl tube extension
(10) fits in the f'dl cup opening
(E). Hang the
icemaker
on the two mounting
screws
(C).
Make sure:
• The power cord is still firmly in the socket.
• The fill tube extension
(10) is still in the fill cup
opening.
(Check
the rear of the refrigerator
to
make sure the fill tube has not been pushed
out
of the back of the refrigerator).
• The icemaker
mounting
screws are located
in
the uppermost
position
of the mounting
slots.
THEN SECURELY TIGHTEN
THE ICEMAKER
MOUNTING
SCREWS.
11
Advertisement
