Download Print this page

GE GBS2OKB Owner's Manual And Installation Instructions page 33

Icemaker accessory kit

Advertisement

Installation Instructions
[] INSTALL THE ICEMAKER FILL CUP
Install the icemaker
fill cup (side-mounted)
(18)
into the icemaker
as shown.
@
ISIREMOVE PLUG COVER
Remove
the electric
plug cover
from the side wall of the freezer
compartment.
Insert
a standard
screwdriver
blade into the slot in
the cover and twist the screwdriver,
opening
the slot. The cover will
pop off. Discard
this cover.
[] POWER CORD ADAPTER
There are two power cord adapters
included
with the
kit; be sure to use the one specified in the Parts List
on page 7. Plug the female end of the power cord
adapter
(19) onto the male terminals
on the icemaker
power cord. When connecting
the adapter
to the
power cord, make sure the seal is in place between
the connectors.
Secure the power cord adapter
to
the icemaker
by putting
it into the hook at the back
of the icemaker
and attaching
it to the icemaker
with awire tie (22).
[] PLUG IN THE ICEMAKER
Place the icemaker on its
side as shown. Insert the
icemaker power cord plug
(A) into the socket on the
side wall, making sure the
prongs and holes are
matched. Press the plug
firmly into the socket.
[] MOUNT THE ICEMAKER
• Lift the icemaker
so the fill tube extension
(10)
fits in the fill cup opening
(C). Hang
the
icemaker
on the two mounting
screws (A).
Make sure:
• The power cord is still firmly in the socket.
• The fill tube extension
(10) is still in the filI cup
opening.
(Check
the rear of the refrigerator
to
make sure the fill tube has not been pushed
out
of the back of the refrigerator.)
• The icemaker
mounting
screws are located
in
the uppermost
position
of the mounting
slots,
• Make sure the icemaker
power switch is set
to 0 (off).
THEN TIGHTEN
THE ICEMAKER
MOUNTING
SCREWS SECURELY.
INSTALL
THE ICE BUCKET
Place the ice bucket that came with your
refrigerator
in the lowest position
on the left side
of the freezer
compartment.
ATI'ACH WARRANTY
LABEL
A label (9) is provided
with this kit to record
the
date of installation
for warranty
purposes.
Apply it
to the back of the refrigerator.
[]
KEEP THIS MANUAL
The warranty for the icemaker
is printed in this
manual. Keep this manual with your Refrigerator
Owner's Manual.
The icemaker
installation
inside the freezer
is now
complete.
Continue
to the Water Valve Assembly
section.
27

Advertisement

loading