Advertisement
Installation Instructions
WATER VALVE ASSEMBLY INSTALLATION INSTRUCTIONS
[]
Are these
the right
instructions
for your model?
Follow
the Installation
Instructions
indicated
by
the label on the back of the refrigerator--
[]
[]
[]
[] []
[]
[]
[] []
[]
[]
[] or []
BEFORE YOU BEGIN
Read each step thoroughly
before
proceeding.
• CAUTION
-
Unplug
the
Refrigerator.
To eliminate
the danger
of electric
shock during
installation,
_
]_
you must unplug
the refrigerator
\_
_k_
from its electrical
oudet.
TOOLS YOU WILL NEED
FlatbladeandPhillips
Pliers
Sharpknife
screwdrivers
1/4" and5/16" Nutdrivers
[]REMOVE
THE COVER
At the bottom
rear of the refrigerator,
remo_,e the
screw(s)
holding
the compressor
compartment
cover (if covered)
and save for reiustalladon
later.
Bend the cover back for access to the compartment.
[] ATTACH THE WATER VALVE
• Locate
the female connector
plug (B).
• Plug the female connector
(B) onto the male
terminals
on the water valve wire extension
(21).
Either wire can go on either terminal.
• Plug the female connector
on the water valve wire
extension
(21) onto the male _
on the
water valve (4). Either wire can go on either
terminal.
• Fasten the water valve to the cabinet edge hole
using the hex-head
screw (13) from the kit.
DO NOT DRILL ANY ADDITIONAL
HOLES.
• Check the plastic water llne nut on the bottom
of
the water valve to be sure it is hand fight. DO NOT
USE TOOLS.
2O
Advertisement
