Post Error Codes - HP D5970A - NetServer - LCII Installation Manual

Chapter 12

Post Error Codes

The POST error codes and the respective descriptions are listed below. Refer to
the HP NetServer Online Documentation CD-ROM for the appropriate response.
Table 12-1. POST Error Codes
Code
0200 Failure fixed disk
0210 Stuck key
0211 Keyboard error
0213 Keyboard locked – Unlock key switch
0220 Monitor type does not match CMOS – Run SETUP
0230 System RAM failed at offset:
0231 Shadow RAM failed at offset:
0232 Extended RAM failed at offset:
0250 System Battery is dead – Replace and run SETUP
0251 System CMOS checksum bad – Default configuration used
0260 System timer error
0270 Real-time clock error
0271 Check date and time settings
0280 Previous boot incomplete – Default configuration used
0281 Memory size found by POST differed from EISA CMOS
0297 Base memory error
02B0 Diskette drive A error
02B1 Diskette drive B error
02B2 Incorrect drive A type – Run SETUP
02B3 Incorrect drive B type – Run SETUP
02D0 System cache error – Cache disabled
02F0 CPU ID
02F4 EISA CMOS not writeable
02F5 DMA test failed
02F6 Software NMI failed
02F7 Fail-safe timer NMI failed
140
Description
Troubleshooting