HP Integrity rx4610 User Manual page 83

Chapter 7
5. Read the documentation included with the accessory board and follow any
special instructions.
6. Identify the accessory slot number to be used. See Figure 7-3.
NOTE Refer to the Readme file for the Tested Products List that
shows specific slot recommendations for a particular PCI board
type.
7. Lift the rear cover to expose the non-hot plug PCI adapter board cover.
8. Loosen the screw that secures the non-hot plug PCI adapter board cover.
9. Grasp the cover by its exposed, long side and lift the cover over the non-
hot plug boards away from the chassis. You can completely remove the
cover if you want by unseating the slot hinge. Access is now available to
the two non-hot plug PCI slots and the Legacy I/O board.
PCI Hot Plug Slots
Figure 7-3. Accessory Slots
Installing Accessory Boards
Non PCI Hot Plug Slots
75