HP Integrity rx4610 User Manual page 126

Chapter 10
Reset
Power Cycle
LAN Alert
Filter Entries
Platform Event Paging (PEP) Setup
The Platform Event Paging (PEP) setup is used to configure the following
telephone paging features.
PEP Feature
Blackout Period
Modem Page
String
118
Enables or disables a system reset when an event filter is
triggered.
Enables or disables a system power cycle when an event
filter is triggered.
Enables or disables sending of a LAN alert message
when an event filter is triggered.
This option lets you enable or disable pre-configured
event filters. Select this button and press <Enter> to
display another setup page with a table of pre-configured
event filters.
Use the arrow keys to move among the options, and press
the <Space Bar> to enable or disable a filter entry. A
filter entry is enabled when an arrowhead is displayed to
the left of the filter entry. The arrowhead is removed
when the filter entry is disabled.
Use the <Tab> key to move between the filter entries
and the <OK> button. Select <OK> to go back to the PEF
setup page. Use the <Esc> key to abort any selection
altogether.
Description
Enter the time, in minutes, between successive phone
pages. The range is 0 to 255 minutes, where 0 disables
the blackout period.
Enter the paging string, which contains both the paging
service number and the characters that are sent once the
connection has been made. The length of the paging
string is determined at run-time from firmware and it is
kept in the internal use area of the BMC FRU
information.
Configuring the HP Server