Chapter 6
Figure 6-4. Placing the Triple Beam Over the Processors
12. If you are installing a CPU thermal dummy, skip this step. Otherwise,
connect the Y-cable to each power pod.
13. Insert the sheet metal baffle at the front of the processors or CPU thermal
dummies in the Processor/Memory Complex. To insert the baffle, press
the flexible retaining tabs in as you slide the baffle into place.
14. Be sure to close the plastic latch to secure the Processor/Memory Complex
halves.
15. Insert the Processor/Memory Complex into the chassis as described in
"Installing the Processor/Memory Complex" in Chapter 5.
Installing an Additional Processor
59