Table of Contents
Advertisement
C4 Manipulator 6. Options
Dimension of the camera plate unit
Dimensions X and Y will change depending on the position of camera mid plate and camera
size. Refer to the table below for the values.
Camera mid plate
The camera mid plate uses the mounting holes
A to D.
By using the different mounting holes, it can be
mounted to the camera base plate in the
different four positions.
Camera adapter plate
Each camera uses the different mounting holes.
Mounting example
68
3-M4 through hole
(for securing cables)
Camera
4-M4 depth 8 * same hole on opposite side
(for securing cables)
USB camera : J (2 holes)
GigE camera : E (3 holes)
Using the mounting hole A
2-M4 depth 5
(for securing cables)
2-M3 depth 5
(for securing cables)
Using the mounting hole C
E.g.) Camera: XC-ES30
C series Rev.2
Advertisement
Table of Contents
