Toro 04591 Operator's Manual page 48

Figure 49
Left side of the machine shown
1. Drain port
2. Drain plug
4. Remove the plug from the drain port
Note:
The drain port is located on the bottom of
the gearbox.
Note:
Allow the oil to drain completely from
the gearbox.
5. Clean the plug.
6. Install the drain plug into the drain port
49).
7. Remove the vent hose and fitting from the top of
the gearbox (Figure
3. Pan
(Figure
(Figure
50).
g322517
1. Vent hose and fitting
8. Fill the gearbox with 384 ml (13 fl oz) of the
49).
specified fluid through the fill port.
9. Install the vent hose and fitting into the fill port
(Figure 50).
10. Perform the following steps to install the tires:
A. Slide the left and right tires on to the wheel
hubs.
B. Install the wheel lug nuts
C. Torque the wheel lug nuts to the specified
torque indicated in
the Wheel Nuts (page
48
Figure 50
2. Fill port
(Figure 48).
Checking the Torque of
47).
g322518