Toro 04591 Operator's Manual page 22

Settings (cont'd.)
M M
AX OW
M T
AX RANSPORT
M R
AX EVERSE
S & T
LOW URN
3WD K
IT
B . R
ATT ESERVE
About
Menu Item
M
ODEL
SN
S/W Rev
I C
NFO ENTER
CU1
CU2
CU3
LL1
LL2
LL3
T 1
RACTION
T 2
RACTION
S
TEERING
Sets the maximum machine
speed while mowing.
Sets the maximum machine
speed while transporting.
Sets the maximum machine
speed while moving the
machine in reverse.
Enables or disables the slow
and turn function.
Enables or disables the
3-Wheel Drive Kit.
Sets the distance that is
needed to transport the
machine back to the shop
when the battery level
becomes low.
Description
Lists the model number of the
machine.
Lists the serial number of the
machine.
Lists the software revision of
the master controller.
Lists the software revision of
the InfoCenter.
Lists the software revision of
the center cutting unit motor .
Lists the software revision of
the front, left cutting unit motor.
List the software revision of
the front, right cutting unit
motor.
Lists the software part number
and the revision version for
the center cutting unit.
Lists the software part number
and the revision version for
the front left cutting unit.
Lists the software part number
and the revision version for
the front right cutting unit.
Lists the software part number
and the revision version for
the front right traction motor.
Lists the software part number
and the revision version for
the front left traction motor.
Lists the software part number
and the revision version for
the rear steering motor.
About (cont'd.)
P
RECHARGE
B
ATTERY
CAN B
US
T 3
RACTION
Note:
Protected under Protected
Menus—accessible only by entering PIN;
refer to Accessing Protected Menus (page
Accessing Protected Menus
Note:
The factory default PIN code for you machine
is either 0000 or 1234.
If you changed the PIN code and forgot the code,
contact your authorized Toro distributor for assistance.
1. From the M
AIN
scroll down to the S
right button.
2. In the S
ETTINGS
scroll down to the P
the right button.
3. To enter the PIN code, press the center button
until the correct first digit appears, then press
the right button to move on to the next digit.
Repeat this step until the last digit is entered and
press the right button once more.
4. Press the middle button to enter the PIN code.
Wait until the red indicator light of the InfoCenter
illuminates.
Note:
If the InfoCenter accepts the PIN code
and the protected menu is unlocked, the word
"PIN" displays in the upper right corner of the
screen.
You have the ability to view and change the settings in
the Protected Menu. Once you access the Protected
Menu, scroll down to the Protect Settings option. Use
the right button to change the setting.
•
Setting the Protect Settings to O
view and change the settings in the Protected
Menu and view the CU motor and traction
information screens without entering the PIN code.
•
Setting the Protect Settings to O
protected options and requires you to enter the PIN
code to change the setting in the Protected Menu.
22
Lists the software part number
and the revision version for
the precharge controller.
Lists the software part number
and the revision version for
the battery.
Lists the machine
communication bus status.
Lists the software part number
and the revision version for
the 3-Wheel Drive Kit (if
equipped).
22).
M , use the center button to
ENU
M and press the
ETTINGS ENU
M , use the center button to
ENU
M and press
ROTECTED ENU
allows you to
FF
hides the
N