Toro 04591 Operator's Manual page 45

Locating the Reel-Drive Circuit
Fuses
The fuses for the reel-drive circuit are located under
the cover on the left side of the machine. Access the
fuse block by removing the left-side cover and the
fuse-block cover (Figure
Figure 41
1. Bolt
2. Left-side cover
Refer to Figure 42 for a description of each fuse on
the fuse-block decal:
Figure 42
1. Center cutting unit—35 A
2. Front left cutting unit—35
A
41).
3. Fuse-block cover
4. Fuse block
3. Front right cutting unit—35
A
4. 3-Wheel Drive Kit (optional
attachment)—35 A
Locating the Precharge Controller
Fuse
The fuse that protects the precharge controller is
located in its own holder on the machine wire harness
to the left of the center (rear) battery set
1. Cap
2. Precharge controller
fuse—3 A
g278267
Locating the Wheel Motor and
Electrical System Fuses
•
The fuses for the right wheel motor (60 A) are
located under the seat
g278268
1. Right-wheel-motor fuse—60 A
•
The fuse for the left wheel motor (60 A) is located
under the cover on the left side of the machine,
near the reel-drive-circuit fuses
45
(Figure
Figure 43
3. Fuse holder
(Figure 44).
Figure 44
(Figure 45).
43).
g292133
g288688