Table of Contents
Advertisement
Figure 72
1. Expansion tank
3.
If the coolant is low, add a 50/50 mixture of water
and ethylene glycol anti-freeze.
Important:
Do not use water only or
alcohol/methanol based coolants, as this
may cause damage.
4.
Install the radiator cap and expansion-tank cap.
Servicing the
Engine-Cooling System
Service Interval: Every 100 hours
Every 2 years
Remove debris from the oil radiator/oil cooler
daily. Clean them more frequently in dirty conditions.
This machine is equipped with a hydraulically-driven
fan drive system that automatically (or manually)
reverses to reduce the radiator/oil cooler and screen
g020441
debris buildup. While this feature can help reduce
the time required to clean radiator/oil cooler, it does
not eliminate the need for routine cleaning. Periodic
cleaning and inspection of the radiator/oil cooler is
still required.
1.
Shut off the engine, remove the key, and raise
the hood.
2.
Clean the engine area thoroughly of all debris.
3.
Clean both sides of the radiator/oil cooler area
thoroughly with compressed air
Note:
Start from the fan side and blow the
debris out toward the back. Then, clean from
the back side and blow toward the front. Repeat
this procedure several times until all chaff and
debris is removed.
Important:
with water can promote premature corrosion
and damage to components.
1. Radiator/oil cooler
4.
Close the hood.
59
(Figure
Cleaning the radiator/oil cooler
Figure 73
73).
g020452
Advertisement
Table of Contents
