Toro 30605TE Operator's Manual page 7

114-0846
1. Read the Operator's Manual for information on starting the
engine—1) Set to neutral; 2) Engage the brake; 3) Set the
engine speed to slow; 4) Turn the key to preheat; 5) Turn
the key to start the engine.
2. Read the Operator's Manual for information on shutting off
the engine—1) Set the engine speed to slow; 2) Disengage
the deck; 3) Lock the parking brake; 4) Wait 5 minutes; 5)
Turn the key to shut off the engine; 6) Remove the key
from the switch.
3. Read the Operator's Manual.
4. Pull the knob out to engage the PTO.
5. Push the knob in to disengage the PTO.
6. Raise the decks to go to H range.
1. Warning—read the Operator's Manual.
2. Warning—do not operate this machine unless you are trained.
3. Warning—wear the seatbelt when seated in the operator's position.
4. Warning—wear hearing protection.
5. Thrown object hazard—keep bystanders away.
6. Cutting hazard of hand or foot—stay away from moving parts; keep all guards and shields in place.
7. Tipping hazard—lower the cutting unit when driving down slopes; slow the machine before turning; do not turn at high speeds.
8. Warning—engage the parking brake, shut off the engine, and remove the key before leaving the machine.
decal114-0846
1. Warning—1) Disengage
the PTO; 2) Raise the deck
2. Do not place your foot
here.
3. Direction pedal
117-2754
7
114-0849
4. Forward direction
5. Reverse direction
decal114-0849
decal117-2754