Table of Contents
Advertisement
Note:
Rotate the key switch to the O
then to the O
position locks the protected menu.
N
You can view and change the settings in the Protected
Menu. Once you access the Protected Menu, scroll
down to Protect Settings option. Use the right button
to change the setting. Setting the Protect Settings to
O
allows you to view and change the settings in
FF
the Protected Menu without entering the PIN code.
Setting the Protect Settings to O
options and requires you to enter the PIN code to
change the setting in the Protected Menu. After you
set the PIN code, rotate the key switch O
to the O
position to enable and save this feature.
N
Setting the Auto Idle
1.
In the Settings Menu, scroll down to Auto Idle.
2.
Press the right button to change the auto idle
time between O
FF
Setting the Maximum
Allowed Mow Speed
•
In the Settings Menu, Scroll down to Mow Speed
and press the right button.
•
Use the right button to increase the maximum full
mow speed (50%, 75%, or 100%).
•
Use the center button to decrease the maximum
full mow speed (50%, 75%, or 100%).
•
Press the left button to exit.
Setting the Maximum
Allowed Transport Speed
•
In the Settings Menu, scroll down to Transport
Speed and press the right button.
•
Use the right button to increase the maximum
transport speed (50%, 75%, or 100%).
•
Use the center button to decrease the maximum
transport speed (50%, 75%, or 100%).
•
Press the left button to exit.
When finished with the Protected Menu, press the left
button to exit to the Main Menu, then press the left
button to exit to the Run Menu.
Setting the Service Due
Timer
This resets the service due hours after a scheduled
maintenance procedure is performed.
1.
In the S
M
ERVICE
M
.
ENU
position and
FF
hides the protected
N
and back
FF
, 8S, 10S, 15S, 20S, and 30S.
, navigate to the H
ENU
2.
Scroll down to the service symbol
Note:
shows N
3.
Below the first icon is the service symbol
and 250.
4.
Highlight the service symbol and press the right
button.
5.
When the new screen appears, confirm R
S
ERVICE
6.
Select Y
7.
After you select Y
clearing and reverts back to the S
selections.
During Operation
General Safety
•
The owner/operator can prevent and is responsible
for accidents that may cause personal injury or
property damage.
•
Wear appropriate clothing, including eye
protection; long pants; substantial, slip-resistant
footwear; and hearing protection. Tie back long
hair and do not wear loose clothing or loose
jewelry.
•
Do not operate the machine while ill, tired, or
under the influence of alcohol or drugs.
•
Use your full attention while operating the
machine. Do not engage in any activity that
causes distractions; otherwise, injury or property
damage may occur.
•
Before you start the engine, ensure that all drives
are in neutral, the parking brake is engaged, and
you are in the operating position.
•
Do not carry passengers on the machine and keep
bystanders and children out of the operating area.
•
Operate the machine only in good visibility to avoid
holes or hidden hazards.
•
Avoid mowing on wet grass. Reduced traction
could cause the machine to slide.
•
Keep your hands and feet away from rotating
parts. Keep clear of the discharge opening.
•
Look behind and down before backing up to be
sure of a clear path.
•
Use care when approaching blind corners, shrubs,
trees, or other objects that may obscure your
vision.
•
Stop the blades whenever you are not mowing.
•
Stop the machine, remove the key, and wait for
OURS
all moving parts to stop before inspecting the
36
If service is currently due, the first icon
.
OW
H
—Are you sure?
OURS
(center button) or N
ES
, a screen prompts the
ES
.
ESET
(left button).
O
H
ERVICE
OURS
Advertisement
Table of Contents
