Table of Contents
Advertisement
Figure 61
1. Battery
2.
Remove the rubber boot from the positive
terminal and inspect the battery.
WARNING
Battery terminals or metal tools could
short against metal components causing
sparks. Sparks can cause the battery
gasses to explode, resulting in personal
injury.
• When removing or installing the
battery, do not allow the battery
terminals to touch any metal parts of
the machine.
• Do not allow metal tools to short
between the battery terminals and
metal parts of the machine.
WARNING
Incorrect battery cable routing could
damage the machine and cables causing
sparks. Sparks can cause the battery
gasses to explode, resulting in personal
injury.
• Always disconnect the negative
(black) battery cable before
disconnecting the positive (red)
cable.
• Always connect the positive (red)
battery cable before connecting the
negative (black) cable.
3.
Coat both battery connections with Grafo 112X
(skin-over) grease, Toro Part No. 505-47,
petroleum jelly, or light grease to prevent
corrosion.
4.
Slide the rubber boot over the positive terminal.
5.
Close the battery cover.
Locating the Fuses
The traction-unit fuses are located under the
power-center cover
64).
Remove the 2 screws securing the power-center
cover to the frame and remove the cover
g020451
1. Power-center cover
1. Fuses
The cab fuses are located in the fuse box in the cab
headliner
(Figure 65
Note:
Cab model only
55
(Figure
62,
Figure
63, and
(Figure
Figure 62
2. Screws
Figure 63
Figure 64
and
Figure
66).
Figure
62).
g020440
g020439
g221933
Advertisement
Table of Contents
