Canon imagePRESS Server G200 Service Manual page 62

Possible Cause
Is the specified paper loa-
ded?
Can you print a Test Page
from the printer driver?
Is the enclosed fan present
and functioning?
■ Other printing problems
The following table lists other printing problems and what to do about them.
Problem
An image is printed on the reverse side of the
paper.
Multiple pages are fed through the printer at
once.
Paper misfeeds occur frequently.
It takes too long to complete the print job.
■ Cleaning the imagePRESS Server
The accumulation of dust on the fans may cause the following problems.
• High temperature inside the chassis
• Noise from the fans
• Short-circuit or damage on the board assembly
As a regular maintenance, it is important to remove dust on the fans and air duct to keep the airflow inside the chassis.
WARNING:
Before you open the imagePRESS Server, it is strongly recommended that you review
injury or damage to the imagePRESS Server.
In addition, keep following in mind:
• To prevent inhaling dust, make sure to wear a mask when cleaning inside chassis.
• If possible, create a backup of the current system before cleaning the imagePRESS Server (see
the system configuration" on page
• When cleaning the imagePRESS Server, make sure to move the imagePRESS Server to a place where the stirred dust does
not cause any problems.
• Use appropriate cleaning tools.
• Vacuum cleaner
Use vacuum cleaner only to remove the accumulated dust outside the chassis.
• Air dust blower
Use a air blower when you remove the dust on the fans, or other area where the vacuum cleaner nozzle cannot be used.
Load the specified paper in any of the input trays.
If you cannot print the Test Page, the printer may be out of order.
You may need to service the printer.
Verify that the enclosed fan is present, oriented correctly, and functioning (see
imagePRESS Server" on page
Table 2: Other printing problems
• Reload the paper in the paper tray upside down.
• Remove all the pages from the paper tray and fan them gently before reloading.
• Check the paper size settings.
• Use the recommended paper.
• Avoid using curled, folded, wrinkled, perforated, or glossy paper.
• The data is so large or complex that it takes additional time to process.
• If the Data indicator is blinking, data is being processed.
• Wait until it is finished.
38).
Solution
35).
Action
57
5. TROUBLESHOOTING
"To reinstall and verify the
"Precautions " on page 3 to avoid
"Backing up and restoring