Canon imagePRESS Server G200 Service Manual page 27

IMPORTANT:
Make sure to remove the security chip from the old motherboard before returning the old motherboard to your authorized
service/support center. If you fail to install the security chip on the new motherboard, the imagePRESS Server will not start
up and all customer-purchased software options will be lost.
● To transfer the security chip to the new motherboard
1. Locate the extraction tool provided in the new motherboard kit.
2. Remove the security chip from socket J23 on the old motherboard (see
Carefully position the extraction tool around the edges of the security chip, and pull the chip straight out of the socket. Make
sure not to put stress on surrounding components.
IMPORTANT:
Do not rock the chip from side to side when removing it from the socket. Doing so may result in permanent damage to the
security chip.
No.
1 Security chip
2 Motherboard
3. Inspect the security chip and carefully straighten any bent pins with needlenose pliers.
4. Install the security chip in socket J23 on the new motherboard.
NOTE:
Be sure to align the small notch in the security chip with the notch in the outline that appears inside socketJ23. If you install the
security chip incorrectly, you may corrupt the security chip and/or the motherboard.
Removing the security chip from the motherboard
22
"Motherboard jumpers" on page 19
1
2
Item
3. REPLACING PARTS
).