Using Fiery System Restore - Canon imagePRESS Server G200 Service Manual

8. Click OK.
■ Restoring the system configuration
You can restore the configuration of the imagePRESS Server to an earlier state using a configuration file. For more information
about creating a configuration file, see "Backing up and restoring the system configuration" on
configuration" on page 38.
NOTE:
If you were unable to create a configuration file, you must configure Setup. After you exit Setup and the imagePRESS Server
reboots, ask the site administrator to restore any archived settings and files that were saved. For more information, see
Configuration and Setup, which is part of the user documentation set.
● To restore the system configuration
1. Connect your computer to the same network as the imagePRESS Server, and open a Web browser window.
NOTE:
Request the permission from the network administrator before you connect your computer to the network.
2. In the URL field of the browser, type the IP address or server name of the imagePRESS Server, and press Enter to open
the WebTools page.
The IP address and server name are listed on the Configuration page.
3. In WebTools, click Configure tab.
4. Log on with Administrator privileges.
The default Administrator password is Fiery.1 (case-sensitive), but the site administrator may have changed the password.
5. Select Fiery Server > Restore.
6. Select the reference file and the data file that you saved earlier, and click Next.
7. Select the settings to restore, and then click Restore.
The restore process starts. Wait until the "Restore Completed!" message appears.
8. Click Reboot.

Using Fiery System Restore

Fiery System Restore allows you to create a backup of the imagePRESS Server for quick recovery later when any problem
happens. You can restore the imagePRESS Server either from images stored on the local hard disk, or from a bootable USB
drive. Fiery System Restore also provides the feature of creating the scheduled backups. You can access the Fiery System
Restore from the WebTools Fiery System Restore tab, or from the Command WorkStation Device Center > General > Tools >
Fiery System Restore.
NOTE:
Only USB flash drives are allowed for USB connection on impagePRESS server G200 (operates on Linux OS), which is different
from the Server type imagePRESS Server (operates on Windows OS). External HDD with USB connection is not supported.
You must login to the system as a system administrator to use the Fiery System Restore features.
NOTE:
Provide guidance to your customers about items to be backed-up and how to back them up, then confirm to see if necessary data
is backed-up before re-installing the system. The system image does not include VDP/FreeForm resources. To back up the
FreeForm masters 1 and 2, save the configuration settings.
Following mention transferred the following URLs
http://help.efi.com/canon/docs/
imagePRESS Server G200 V1.0 > Configuration and Setup > Backing up and restoring the imagePRESS Server P90
[Configuration settings not available for backup in Configure]
Configuration settings not available
for backup in Configure
Jobs, job logs, or job settings Backing up the system configuration
40
4. INSTALLING SYSTEM SOFTWARE
"Backing up the system
Alternate procedure
"To back up the system configuration" on page 39