Huawei RP200 Room Presence Installation Manual page 49

12 Installing the RP200 Display (Method 2)
10.1
12.2 Installing the Display
8-1
(For Samsung-LH55DCE only) Tighten the
two screws in hole 1 in the upper part of
the vertical bars, then the two screws in the
lower part. (A total of four M8 x 20 Phillips
head hexagon upset screws are required.)
M6 M8
1
9
Install one display onto the brackets. No screws are required.
Hole 1
45
(For LG-55SE3D only) Secure the two
8-2
screws in hole 6 in the upper part of the
vertical bars, then the two screws in the
lower part. Four M6 x 16 Phillips head
hexagon upset screws are required.
Hole 6
Mounted as shown here
M6 M8
6