11 Installing the RP200 Display (Method 1)
11.2
Installing the Display
NOTE
There are two types of dual-screen brackets. For details about the simplified installation method, see Installing
the RP200 Display (Method 2).
3
Assemble the dual-screen brackets.
Place the left and right brackets horizontally on the floor.
4
Secure the dual-screen brackets.
The TOP arrow
should point upward.
Buckle both ends of each connecting bar to the left
and right brackets respectively.
Use the M6 Allen wrench to tighten the screws.
First, place the screws into holes and slightly
tighten them using your hands. Then, use the
M6 Allen wrench to fasten them.
29