Installing The Panel - Huawei RP200 Room Presence Installation Manual

9 Installing Components in the Rack
9.5

Installing the Panel

NOTE
Before installing the panel, route all cables connected to the display out of the middle part of the
upper front panel and route all cables connected to the TE30/VPC600/VPT300 out of the rear
access panel.
1 (For RP-A/T only) Power on the TE50.
3 Lay audio and video cables from the middle
part of the upper front panel.
TE50 power button
The yellow cable is
indicative.
2 Install the lower front panel.
4 Install the speaker cover plate.
19
Note the installation direction.