Unpacking The Box And Checking The Items In It; Checking The Box Before Unpacking It - Huawei RP200 Room Presence Installation Manual

Hide thumbs Also See for RP200 Room Presence:
Table of Contents

Advertisement

5 Checking the Installation Environment

6 Unpacking the Box and Checking the Items in It

The microphone must be placed at least
2 meters away from the monitor (as
shown in the right figure).
6 Unpacking the Box and Checking the Items in It
6.1

Checking the Box Before Unpacking It

You can unpack the box as long as it meets one or two items of the following requirements. If
any exception occurs, contact Huawei engineers for a replacement.
1
The box has been placed in the same area that the component is to be installed in.
2
The box's appearance is intact, without severe damage or soaking.
3
The box is not upside down. Here, the box of the display for the RP100 is used as an
example. If the tiltwatch indicator turns red, the box was once tilted. Power on the display
before installing it. If the display is powered on, it works properly.
4
The display is intact.
Not tilted up
8
2
meters
Tilted up

Advertisement

Table of Contents
loading

Table of Contents