Installing The Display 2 - Huawei RP200 Room Presence Installation Manual

10 Installing the RP100 Display
10.2 Installing the Display
Prepare the display, single-screen bracket, cables, and screws as specified in the RP
list.
CAUTION
Ensure that the cushion and ground are clean and tidy, preventing the display from being damaged
by sundries such as screws.
Sort the cables.
1
1. Connect one end of the display power
cable to the 7-outlet PDU in the rack.
2. Lay the other end of the display power
cable out of the middle part of the upper
front panel.
Take out the M6 Allen wrench from the
3
single-screen bracket package.
(For LG-49SE3KB/LG-55SE3KB/LG-
4
55SE3D only) Remove the LG LOGO.
Remove the screws from the mounting
2
holes.
Phillips screwdriver
(For LG-49SE3KB and LG-55SE3KB
5
only) Tighten the M6 x 15 cross
recessed screws to secure the VESA
adapting frames onto the back of the
display.
21
packing
Soft cushion