Huawei RP200 Room Presence Installation Manual page 47

12 Installing the RP200 Display (Method 2)
10.1
12.2 Installing the Display
5
(For LG-55SE3D only) Remove the LOGO of the LG display.
(For LG-55SE3D only) Adjust the brackets.
6-1
1. Loosen the four screws on the left and right of a bracket, adjust the screws in the lower part
to the position marked "20", and then tighten the screws.
2. Loosen the screw of the back clamp in the lower part of the bracket to adjust the back
clamp for subsequent display installation.
3. Adjust the other bracket in the same way.
Before adjustment
Just loosen the screws.
Do not remove them.
Mark "20"
CAUTION
Back
clamp
43
After adjustment