Installing The Display - Huawei RP200 Room Presence Installation Manual

11 Installing the RP200 Display (Method 1)
11.2

Installing the Display

CAUTION
Ensure that the cushion and ground are clean and tidy, preventing the display from being damaged
by sundries such as screws.
5
To assemble the displays:
1. Lay a soft cushion on the floor and place the display on the cushion with its screen
facing down.
2. Push the two displays to the center until they are tightly placed side by side and
horizontally aligned with each other.
3. Remove the screws at the back of the display, as shown in the following figure.
55'' LG Display: 16 screws at the back
LH48DCE/LH55DCE Display: 12 screws at the back
LG-55SE3D Display: 14 screws at the back
47''/49''LG Display: 14 screws at the back
TCL Display: 14 screws at the back
30