Installing The Rp200 Display (Method 2); Removing The Camera Spacer - Huawei RP200 Room Presence Installation Manual

12 Installing the RP200 Display (Method 2)

10.2
10.1
10.1 12.1

Removing the Camera Spacer

1 Remove the rear cable cover.
1
Remove the camera spacer.
3 3
10.1
10.1
12.2 Installing the Display
Prepare the two displays, dual-screen brackets, display back brackets, connecting plates, and
screw packages as specified in the RP packing list.
1
1 Sort the cables.
1. Connect one end of the display power cable to the 7-outlet PDU in the rack.
2. Route the other ends of the power cable and video cable of the display out of the middle
part of the upper front panel.
Phillips
screwdriver
Camera spacer
2
Remove the crimping cover.
NOTE
Keep the camera spacer in a safe place for
future use during the TE30/VPC600/VPT300
installation.
40