10 Installing the RP100 Display
DANGER
The display requires at least two people to lift or move it. Exercise caution when lifting or moving it.
CAUTION
If you want to adjust up the RP rack, elevate it before installing the display. For details about how to
elevate the rack, see steps 7 and 8 in Appendix A "Elevating the Rack."
10.1
Removing the Camera Spacer
1
Remove the rear cable cover.
3
Remove the camera spacer.
Phillips
screwdriver
Camera spacer
2
Remove the crimping cover.
4
NOTE
Keep the camera spacer in a safe place for
future use during the TE30/VPC600/VPT300
installation.
20