Mitsubishi Electric MELSEC iQ-F Series User Manual page 41

■Operation to clear the e-mail setting storage area
Turn 'E-mail setting storage area clear request' (Un\G4372) from 0 to 1. This causes the e-mail setting storage area to be
cleared, which means that the e-mail setting change function becomes disabled.
When the e-mail setting storage area is cleared, the e-mail settings configured with the module parameters will be used.
Ex.
The following figure shows a case where the sender e-mail address and sender name are set from the module parameters to
the Ethernet module, resulting in the sender e-mail address being set to abc@example.com and the sender name to ABC.
In addition, even when the Ethernet module is powered off and on or the CPU module is reset, the e-mail settings stored in
the module parameters are set to the Ethernet module.
Ethernet module
Sender e-mail address abc@example.com
Sender name ABC
Values in the module parameters are set.
■Procedure for clearing the e-mail setting storage area
The following describes the procedure for clearing the e-mail setting storage area.
1.
Write 1 to 'E-mail setting storage area clear request' (Un\G4372).
2.
Check the write result with the following buffer memory areas.
Buffer memory address Name
Un\G4373.b0 E-mail setting storage area clear completed
Un\G4373.b1 E-mail setting storage area clear error
Un\G4376 E-mail setting storage area clear error code
3.
Check that 'E-mail setting change function enable flag' (Un\G4374) turns off.
4.
Check that the e-mail setting values configured with the module parameters are stored in E-mail send function
(Un\G4173 to Un\G4369).
Immediately after 1 is written to 'E-mail setting storage area clear request' (Un\G4372), the values configured
with the module parameters are stored in the buffer memory and set as the e-mail settings for the Ethernet
module.
If the clear processing for the e-mail setting storage area is not completed successfully, the error code
(1931H) is stored in 'E-mail setting storage area clear error code (Un\G4376).
Module parameter
Sender e-mail address
Sender name
E-mail setting storage area
Sender e-mail address
Sender name
When completed successfully
On
Off

abc@example.com
ABC
0: CLEAR
When completed with an error
On
On
Error code
4 FUNCTION LIST
4.3 Other Functions
4
39