Mitsubishi Electric MELSEC iQ-F Series User Manual page 161

E-mail setting change function
■E-mail setting storage area write request (Un\G4370)
When this area is changed from 0 to 1 or from 0 to 2, the e-mail settings stored in E-mail send function (Un\G4173 to
Un\G4369) are written to the external flash ROM.
• 0: No write request
• 1: Requesting write
• 2: Requesting write (no password change)
■E-mail setting storage area write status (Un\G4371)
This area stores the e-mail setting write request result.
E-mail setting storage area write completed (Un\G4371.b0)
The status will be 1 (Completed) when writing to the e-mail setting storage area completes or fails.
The status will be 0 (Not completed) when E-mail setting storage area write request (Un\G4370) is changed from 1 to 0 or
from 2 to 0.
• 0: Not completed
• 1: Completed
E-mail setting storage area write error (Un\G4371.b1)
The status will be 1 (Error) when writing to the e-mail setting storage area fails.
The status will be 1 (Error) if there is a problem in contents of the e-mail setting storage area when the power supply is turned
from off to on.
The status will be 0 (Normal) when 'E-mail setting storage area write request' (Un\G4370) is changed from 1 to 0 or from 2 to
0.
• 0: Normal
• 1: Error
■E-mail setting storage area clear request (Un\G4372)
When this area is changed from 0 to 1, the e-mail settings are cleared from the external flash ROM.
• 0: No clear request
• 1: Requesting clear
■E-mail setting storage area clear status (Un\G4373)
This area stores the e-mail setting clear request result.
E-mail setting storage area clear completed (Un\G4373.b0)
The status will be 1 (Completed) when clearing of the e-mail setting storage area completes or fails.
The status will be 0 (Not completed) when 'E-mail setting storage area clear request' (Un\G4372) is changed from 1 to 0.
• 0: Not completed
• 1: Completed
E-mail setting storage area clear error (Un\G4373.b1)
The status will be 1 (Error) when clearing of the e-mail setting storage area fails.
The status will be 0 (Normal) when 'E-mail setting storage area clear request' (Un\G4372) is changed from 1 to 0.
• 0: Normal
• 1: Error
■E-mail setting change function enable flag (Un\G4374)
This area stores whether an engineering tool or external flash ROM is used for the e-mail setting.
• 0: Setting values from an engineering tool
• 1: Setting values registered to a flash ROM by using the buffer memory
■E-mail setting storage area write error code (Un\G4375)
If an e-mail setting write request is completed with an error, the error code is stored.
• 0: Normal
• Other than 0: Error code
APPX
Appendix 4 Buffer Memory
A
159