Mitsubishi Electric MELSEC iQ-F Series User Manual page 102

Status of Each Connection
The status of each connection of the FX5-ENET selected.
[Diagnostics]  [Ethernet Diagnostics]  Select the "Module" in the [Target Module Specification].  Select the [Status
of Each Connection] tab.
Item
Connection No./Function
Host Station Port No.
Communication Destination Communication Method
Communication Destination IP Address
Communication Destination Port No.
Latest Error Code
Protocol
Open System
TCP Status
Remote Password Status
Continuous Unlock Lost Counts
*1 For connections used by the e-mail function or the MQTT communication function, the communication destination IP address and port
number configured in the parameter settings of each function are displayed. However, if the communication destination is set as a host
name, "----" is displayed for the communication destination IP address.
Click the [Clear Latest Error Code] button to clear all the errors displayed in "Latest Error Code" of each connection.
10 TROUBLESHOOTING
100
10.2 Checking the Module Status
Description
Displays the connection number and functions.
Displays the own station port number used.
Displays the communication method.
Displays the IP address of the sensor/device to be connected, which is set in the parameter
*1
settings.
Displays the port number of the sensor/device to be connected, which is set in the parameter
*1
settings.
Displays the error code that indicates the definition of latest error occurred.
Displays the protocol (TCP/IP, TLS, or UDP/IP).
Displays the open method (Active, Unpassive, or Fullpassive) when the protocol of the connection
is TCP/IP.
Displays the status (open status) of connection with the sensor/device when the protocol of the
connection status is TCP/IP.
Not supported.
Not supported.